BEKA ZEPTO Скачать руководство пользователя страница 32

Страница: 32 / 56

-32-

O_1

EN.docx

4.4

Obligations of the operator / user

•

If movable, rotating, hot or cold parts of the device bear risks, the customer must protect these parts against

contact. This protection must not be removed.

•

Any leakages of hazardous substances must be drained in a way that no risks for persons or the environment
arise. Please also refer to the data or safety data sheets of the respective manufacturers.

•

Observe all legal provisions.

•

Hazards due to electricity are to be excluded.

•

Examination of pipes and hoses regarding safe provision, use, proper assembly and function has to be carried out
according to regionally applicable directives. Inspection intervals may not be exceeded.

•

Defective pipes or hoses must be replaced immediately and professionally.

•

Hydraulic hoses and polyamide pipes are subject to natural aging and have to be exchanged in regular intervals

according to the manufacturer’s specifications.

•

A safety data sheet of the currently used lubricant must be provided at the device.

•

Observe the universally valid Ordinance on Hazardous Substances in its latest version.

4.5

Safety instructions for maintenance, inspection and assembly

All

maintenance, inspection

and

assembly work

may only be carried out by

qualified personnel

who is sufficiently

informed by thorough reading of the user information.

Any work

at the device may generally only be carried out at

complete standstill

and in

pressureless

as well as

disconnected condition

. Furthermore, appropriate

personal protective equipment

(goggles among others) is

necessary. The shutdown procedure of the device as described in the manual must be strictly followed.

Secure the device against intentional or unintentional recommissioning during maintenance or repair. All safety and
protection arrangements have to be put back in place again immediately after completion of the work.

Environmentally hazardous media must be disposed of professionally and according to the relevant legal provisions.

Polluted

and

contaminated surfaces

have to be cleaned before maintenance. Please wear protective equipment to

that purpose. See the lubricant manufacturers‘ safety data sheets hereto, respectively the data sheets provided by the

manufacturers of auxiliaries and working materials.

Check the surface temperature of the device as a possible heat transfer bears the

risk of burns

. Wear heat resistant

protective gloves!

Open flame and fire are strictly forbidden

during maintenance, inspection and repair due to fire hazard.

4.6

Unauthorized modification and production of spare parts

Modification, repair and alterations of the device are only accepted after manufacturer feedback.

Original spare parts

and authorized accessories from the manufacturer contribute to

safety

. The use of other parts can result in the loss of

any liabilities for the resulting consequences. BEKA does not assume liability for parts that are retrofit by the operator.

4.7

Inadmissible modes of operation

Operational safety of the device is only guaranteed when it is appropriately applied as indicated in the operating and assembly manual.
Never exceed or fall below the limit values, as stated in the technical data.

4.8

Electrostatic discharge

Avoid electrostatic discharge! There are electronic components integrated into the devices which might be destroyed
by electrostatic discharge. Observe the safety precautions against electrostatic discharge according to DIN EN 61340-
5-1/-3. Ensure that the environment (persons, workplace and packing) is well grounded when handling these devices