Page
9 ©
BEKA 2017 All rights reserved!
...a product of
5.3
Hazards in case of non-observance of the safety instructions
Results of
non-observance
of the
safety instructions
can be
hazards to persons
, the environment and for the
device. Non-observance of the safety instructions may result in the loss of any liability claims. In detail the non-
observance could entail the following hazards:
Failure of important device functions.
Failure of prescribed methods for maintenance and repair.
Danger to persons by electrical, mechanical and chemical effects.
Danger to the environment by leakage of hazardous substances.
5.4
Obligations of the operator / user
If movable, rotating, hot or cold parts of the device bear risks, the customer must protect these parts against
contact. This protection must not be removed.
Any leakages of hazardous substances must be drained in a way that no risks for persons or the environment
arise.
Keep to all legal provisions.
Hazards due to electricity are to be excluded.
Examination of pipes and hoses regarding safe provision, use, proper assembly and function has to be carried out
according to regionally applicable directives. Inspection intervals may not be exceeded.
Defective pipes or hoses must be replaced immediately and professionally.
Hydraulic hoses and polyamide pipes are subject to a natural aging-process and thus have to be exchanged in
regular intervals according to the manufacturer’s specifications.
A safety data sheet of the currently used lubricant must be provided at the device.
5.5
Safety instructions for maintenance, inspection and assembly
All
maintenance
,
inspection
and
assembly work
may only be carried out by
qualified personnel
who is sufficiently
informed by thorough reading of the user information.
Generally any work
at the device may only be carried out at
complete standstill
and in
pressureless
as well as
disconnected condition
. Furthermore appropriate
personal protective equipment
(goggles among others) is
necessary. The shutdown procedure of the device as described in the manual must be strictly followed.
Secure the device against intentional or unintentional recommissioning during maintenance or repair. All safety and
protection arrangements have to be put back in place again immediately after finishing work.
Environmentally hazardous media must be disposed of professionally and in correspondence to relevant legal
provisions
.
Polluted
and
contaminated surfaces
have to be cleaned before maintenance. Please wear protective
equipment to that purpose. See the lubricant manufacturers‘ safety data sheets hereto, respectively the data sheets
provided by the manufacturers of auxiliaries and working materials.
Check the surface temperature of the device as a possible heat transfer bears the
risk of burns
. Wear heat resistant
protective gloves!
Open flame and fire are strictly forbidden
during maintenance, inspection and repair due to fire hazard.
5.6
Unauthorized modification and production of spare parts
Modification, repair and alterations of the device are only accepted after manufacturer feedback.
Original spare parts
and authorized accessories from the manufacturer contribute to
safety
. The use of other parts can result in the loss of
any liabilities for the resulting consequences. BEKA does not assume liability for parts that are retrofit by the operator.
