Page
10 ©
BEKA 2017 All rights reserved!
...a product of
5.7
Inadmissible modes of operation
The operational safety of the device is only guaranteed for appropriate application as indicated in the operating manual. Never exceed
or fall below the limit values, as stated in the technical data.
5.8 Electrostatic
discharge
Avoid electrostatic discharge! There are electronic components integrated into the devices which might be destroyed
by electrostatic discharge. Observe the safety precautions against electrostatic discharge according to DIN EN 61340-
5-1/-3. Ensure that the environment (persons, workplace and packing) is well grounded when handling these devices.
5.9
General hazard warning – residual risk
All components are designed according to valid regulations of the construction of technical systems in regards to
operational safety and accident prevention. Independently from this the use can lead to hazards for the user or third
parties as well as for other technical facilities. Therefore, the device may only fulfil its intended use in a
technically
acceptable and faultless condition
. This has to happen in adherence of the according safety regulations and under
observance of the operating manual.
Inspect
the device and its attachment parts
regularly
and
check
them for
possible
damage
or
leakages
.
Liquids
could
escape under high pressure
from pressurized components which
become
leaky
.
