Prism Medical Ltd. V1-2014
21
5.7 Automatic tub filling control
Picture 7:
You can take out
the distributor unit.
Picture 1:
Required tools:
1 x Phillips screwdriver
1 x combination wrench 10
mm
1 x Allen wrench 4 mm
Picture 4:
The illustration
shows the screws
for installing the
distributor unit in
the retaining plate
for disinfectant.
Picture 2:
The illustration shows
the control for automatic
filling mounted on the
disinfectant holder. To
open the rear wall, follow
the instructions in point
5.18.
Picture 3:
Open the cover
of the distributor
unit.
Then unclamp
all cables and
remove them
from the
distributor unit.
Picture 5:
Loosen and
remove the two
screws from the
distributor unit.
Picture 6:
The illustration
shows how to
loosen and remove
the two screws from
the distributor unit.
