Prism Medical Ltd. V1-2014
33
Picture 15:
Take the tub body out
of the lifting frame.
Picture 16:
The illustration
shows the tub
body removed
from the lifting
frame.
5.17 Sensor for automatic water stop
Picture 6:
Apply a layer of
transparent silicone
to the reverse side of
the sensor and place
it at the position of
the old sensor.
1 x sensor for autom.
water stop
Picture 3:
Loosen the sensor
using a carpet knife.
Picture 4:
Open the distributor
unit in order to
unclamp the cable
from the sensor.
Picture 5:
Unclamp the cable from
the sensor and take
the cable out of the
distributor unit. Note
that the PG threaded
connection must be
opened.
Picture 1:
Required tools:
1 x slotted screw
driver, small
1 x carpet knife
1 x combination pliers
