background image

BE-Rev 4 -48 17

Made in Italy

  IP44

BEINAT  S.r.l.
Via  Fatebenefratelli  122/C  10077,  S.  Maurizio  C/se  (TO)  -ITALY
Tel.  011.921.04.84  -  Fax  011.921.14.77
http://  www.beinat.com

Control unit 

BX150

Lo  styling  è  della    b  &  b  design

Dealer  stamp

Purchase  date:

Serial  number:

Beinat S.r.l. following the purpose of improving its products, it reserves the right to modify the technical, aesthetic and functional characteristics
at any time and without giving any notice.

Business  -  [email protected]
Technical  support  -  [email protected]

INSURANCE.  This  device  is  insured  by  the  SOCIETÀ  REALE  MUTUA  for  the  PRODUCT'S  GENERAL  LIABILITY
up to a maximum of 1,500,000.00 EURO against damages caused by the device in case of failures in functioning.

WARRANTY.  The  warranty  term  is  3  years  from  manufacturing  date,  in  agreement  with  the  following
conditions.  The  components  acknowledged  as  faulty  will  be  replaced  free  of  charge,  excluding  the  replacement
of  plastic  or  aluminium  cases,  bags,  packing,  batteries  and  technical  reports.
The  device  must  arrive  free  of  shipment  charges  to  BEINAT  S.r.l.
Defects  caused  by  unauthorized  personnel  tampering,  incorrect  installation  and  negligence  resulting  from
phenomena  outside  normal  functioning  shall  be  excluded  from  the  warranty.
BEINAT S.r.l.  is  not  liable  for  possible  damage,  direct  or  indirect,  to  people,  animals,  or  things;  from  product
faults  and  from  its  enforced  suspension  of  use.

DISPOSAL OF OLD ELECTRICAL & ELECTRONIC EQUIPMENT.
This symbol on the product or its packaging to indicates that this product shall not be treated as household waste. Instead, it shall be handed over to
the applicable collection point for the recycling of electrical and electronic equipment, such as for example:
- sales points, in case you buy a new and similar product
- local collection points (waste collection center, local recycling center, etc...).
By ensuring this product is disposed of correctly, you will help prevent potential negative consequence for the environment and human health, which could
otherwise be caused by inappropriate waste handing of this product. The recycling of materials will help to conserve natural resources. For more detailed
information about recycling of this product, please contact your local city office, your household waste disposal service or the shop where you purchased
the product.
Attention: in some countries of the European Union, the product is not included in the field of application of the National Law that applies the European
Directive 2002/96/EC and therefore these countries have no obligation to carry out a separate collection at the “end of life” of the product.

Содержание BX150













Отзывы: