D
Infrared Light Module SM-IR-16-2
Connecting the servos
2 servos can be connected to pin strips X5/1 and X5/2.
Attention:
The maximum current consumption of the servos may not exceed 600mA! Before
connecting, please check the technical data of your servos.
If you want to use servos with higher current consumption, the servo cannot be
supplied via the plug-in on the light module! The red cable of the servos must be
directly supplied with a voltage of 4-6V.
See example of circuit diagram:
8
BEIER-Electronic
April 03. 2012
