8
ULTRALINK ULM2000
Selecting 5 or 6 changes the Mic Gain setting (ch. 3.5). Selecting 7 or 8 changes the Auto
Mute settings (ch. 3.6). Values 9 and 0 are invalid.
4.
Confirm your selection by briefly pressing the POWER button.
5.
If the selection you made is valid, the LED blinks quickly once again. An invalid selection is indicated
with 5 quick blinks, and the unit is immediately no longer in the programming mode. In this case, start
anew with step 2.
After a brief break, a second blink code is given: The LED blinks according to the value selected (for
example, in this case 3 times) with medium tempo.
If no entry is made for more than 5 seconds (either on the selection switch or by pressing the
POWER button), the LED blinks quickly 5 times, and the programming mode is aborted.
6.
After a second brief blink break, an additional blink code is given as a confirmation:
V
Successful loading of a preset is signaled with two slow blinks. The unit leaves the programming
mode.
V
If the preset could not be loaded, the LED blinks quickly 5 times. In this case, start anew with
step 2.
7.
After setting the desired preset, disengage the MUTE switch.
3.5 Mic Gain
You have the option to adjust the ULM2000 to the level of the signal being transmitted. If you talk very softly
into the microphone, we recommend the “High Gain” setting; if the sound is loud, select “Low Gain.” This
way, optimal transmitter drive is achieved.
1.
Engage MUTE. The transmitter can now be switched into the programming mode.
2.
Turn the selection switch to 0 and confirm your selection by keeping the POWER button pressed for 2
seconds. As a confirmation, the LED blinks slowly once and then once again with medium tempo. The
transmitter is now in the programming mode and waits for you to enter a one-digit number.
3.
Select one of the following two digits on the selection switch:
V
Low Gain: select 5
V
High Gain: select 6
If a valid selection is made, the LED blinks quickly once to confirm your selection. This way, you can be
sure that a correct value is entered (in regard to preset, MicGain and Auto Mute selection) even before
confirming your selection.
Selecting the values 1 thru 4 changes the preset settings (ch. 3.4). Selecting 7 or 8 changes
the Auto Mute settings (ch. 3.6). Values 9 and 0 are invalid.
4.
Confirm your selection by briefly pressing the POWER button.
5.
If the selection you made is valid, the LED blinks quickly once again. An invalid selection is indicated
with 5 quick blinks, and the unit is immediately no longer in the programming mode. In this case, start
anew with step 2.
After a brief break, a second blink code is given: The LED blinks according to the value selected (for
example, in this case 3 times) with medium tempo.
V
Low Gain: the LED blinks once with medium tempo.
V
High Gain: the LED blinks twice with medium tempo.
If no entry is made for more than 5 seconds (either on the selection switch or by pressing the
POWER button), the LED blinks quickly 5 times, and the programming mode is aborted.
6.
After a second brief blink break, an additional blink code is given as a confirmation:
V
Successful loading of a preset is signaled with two slow blinks. The transmitter leaves the
programming mode.
V
If the setting for Mic Gain could not be stored, the LED blinks quickly 5 times. In this case, start
anew with step 2.
7.
Disengage MUTE.
3. HAND-HELD TRANSMITTER OPERATION
