background image

13

ULTRALINK ULM2000

FEDERAL COMMUNICATIONS COMMISSION

COMPLIANCE INFORMATION

Operation of this device is subject to the following two conditions:

(1)

this device may not cause interference, and

(2)

this device must accept any interference, including interference that may cause undesired
operation of the device.

Notice:

Changes or modifications made to this equipment not expressly approved by BEHRINGER International
GmbH may void the FCC/ IC authorization to operate this equipment.

Technical specifications and appearance subject to change without notice. The information contained herein is correct at the time of printing. The
names of companies, institutions or publications pictured or mentioned and their respective logos are registered trademarks of their respective
owners. Their use neither constitutes a claim of the trademarks by BEHRINGER nor affiliation of the trademark owners with BEHRINGER.
BEHRINGER accepts no liability for any loss which may be suffered by any person who relies either wholly or in part upon any description,
photograph or statement contained herein. Colors and specification may vary slightly from product. Products are sold through our authorised
dealers only. Distributors and dealers are not agents of BEHRINGER and have absolutely no authority to bind BEHRINGER by any express or
implied undertaking or representation. No part of this manual may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying and recording of any kind, for any purpose, without the express written permission of BEHRINGER International
GmbH. BEHRINGER

®

 is a registered trademark.

ALL RIGHTS RESERVED. © 2006 BEHRINGER International GmbH,

Hanns-Martin-Schleyer-Str. 36-38, 47877 Willich-Münchheide II, Germany.

Tel. +49 2154 9206 0, Fax +49 2154 9206 4903

FEDERAL COMMUNICATIONS COMMISSION COMPLIANCE INFORMATION

Содержание ULTRALINK ULM2000















Отзывы: