Bego VARSEO S Basic, Перевод оригинальной инструкции по эксплуатации

Страница: 43 / 52

English VARSEO S
39
86
08
7 B
A
-en
/0
2
en
Service Messages
VARSEO S has incorporated several maintenance
instructions to ensure a long service life of the
VARSEO S cartridge.
Maintenance instructions for the operator -
The first service note will be displayed on the
VARSEO S screen after every fiftieth print job.
1.
Clean the VARSEO S cartridge and both glass
plates.
2. Check the non-stick film for signs of damage
and replace it, if needed (
→
page 40).
1 Mix Mode (
→
page 28)
2 Warning message
3 Light bulb
4 Thermometer
5 Packages/editions (Basic or Partner)
6 Network
Maintenance instructions for the service -
Light bulb: Lights up when the light intensity of the
UV light source is too low.
1.
Inform the service department.
Maintenance note ambient temperature -
Thermometer : Lights up when the device senses a
temperature above 35 °C or below 15 °C.
1.
Make sure that the device is not exposed to
temperatures outside the specified tempera-
ture range.
1 2 3 4 5 6