background image

WARRANTY REGISTRATION

BEFCO, Inc.
P.O. Box 6036
Rocky Mount, NC 27802-6036

     Tel: (252) 977.9920 - Fax: (252) 977.9718

Model #                    Serial #

Phone

Date of delivery              Invoice #

Town                           State          Zip

Town                            State        Zip

Street

Street                               Country

Retail Customer

Dealer    

                       

Acct. #

Customer’s Signature:                                       

Dealer’s Signature:                                            

Date:                                                                  

Date:                                                                  

Inspected by:                                                     

Tractor make:                                                    

Model:                               ; HP                          

Type of operation: Private homeowner,
Landscaping, Commercial maintenance, Golf
Course, Municipality, Turf Farm, others:            
                                                                          
Approximate number of acres machine will be
used on annually:                                              

I hereby acknowledge that:
I have received and accepted delivery of the
machine described.
The equipment was checked thoroughly for
loose or missing parts and has been adjusted
in accordance with the Pre-Delivery Checklist.
I have read and understand the nature and
extent of the warranty and understand clearly
that there were and are no other
representations of warranties either expressed
or implied, made by anyone. I have been
advised on proper operation, maintenance and
lubrication procedure of this equipment.
I have been instructed on and do understand
the application, limitation and capacities this
equipment was designed and recommended
for, all as described in the Operator’s Manual
and literature published by the Company.

Pre-Delivery Checklist:

Oil in gearbox. 

Greased fittings. 

Safety guards in place.

All hardware tight. 

Bolts torqued correctly.

Attached unit to tractor.  Yes/No.

Field adjusted.                Yes/No. 

Test run.                         Dry/Infield.

Safety decals.

Operator’s Manual.

The machine described above, has been
prepared for delivery according to the
Pre-Delivery Checklist and the Customer has
been instructed in its care and operation and
the condition of warranty.

This registration along with a copy of the invoice must be sent to BEFCO, Inc.
within 14 days of date of purchase.

Содержание TURBO-HOP 301-300













































Отзывы: