background image

8 - WARRANTY

BEFCO’s responsibility will be limited to substitution of the acknowledged defective
merchandise to the same place of delivery as the previous one was supplied.

1. LIMITED WARRANTY

BEFCO, Inc. herein referred to as the Company, warrants its machines and related
accessories, hereafter referred to as the Machine, to be free from defects in material
and workmanship, for a period of twelve (12) months from the date of invoice to the first
registered owner; this limited warranty does not apply to common wear items and
excludes belts, shear pins, oil, grease, tires, tubes, hydraulic hoses, knives and PTO
shafts.
Labor will be reimbursed at $40.00 per hour based on BEFCO’s time schedule.
Cost of transport to the servicing dealer is the responsibility of the customer.
Warranty coverage shall not be transferable from the first owner to any subsequent
owner.

2. DISCLAIMER OF ALL OTHER WARRANTIES AND REMEDIES
Neither the Company nor any company affiliated with the Company makes any
warranties, representations or promises, expressed or implied, as to the quality,
performance or application of its products other than those set forth herein and
does not make any implied warranty of merchantability or fitness.
The only remedies the purchaser has in connection with the breach, or
performance of any warranty on the Company’s Machine are those set forth
herein. In no event will the dealer, the Company, or any company affiliated with
the Company, be liable for:

a.

Injuries or damages of any kind or nature, direct, consequential or
contingent to person or property.

b.

Any expenses incurred by the owner to repair, replace or rework any
allegedly defective item.

c.

Any loss, cost, forfeiture or damages (including loss of profits; loss of
crops; loss because of delay in field operations; any expenses or loss
incurred for labor, supplies, substitute machine rental; liabilities of the
owner to its customers or third persons; and all other consequential
damages, losses, liabilities or damages for any other reasons) whether
direct or indirect, and whether or not resulting from or contributed to by the
default or negligence of the Company, its agents, employees and
subcontractors which might be claimed as a result of the use or failure of
the equipment delivered.

The Company’s liability based on this limited warranty or any other applicable
laws shall be limited to replacement or refund of the purchase price of the
product.
The limited warranty extended herein gives you specific rights and you may also
have other rights which vary from state to state. Neither the dealer nor the
Company personnel has the authority to make any representation or to modify
the terms and limitations of this warranty in any way.

W

ARRANTY

39

BEFCO

T

URBO

-H

OP

O

PERATOR

S

 M

ANUAL

Содержание TURBO-HOP 301-300













































Отзывы: