BEFCO D90-060, Руководство оператора

Страница: 16 / 60

control lever in this position. With the engine idling, slowly engage the PTO drive. Move
the throttle lever gradually until the PTO speed indicated on the shredder is obtained.
The shredder is designed for a PTO speed of 540 rpm.
Shift the transmission to a slow speed gear and start forward, increase the ground
speed by shifting upward until the desired speed is obtained. Do not mow in reverse
unless absolutely necessary and only after careful observation of the area behind the
shredder.
CAUTION: Do not operate this shredder at a PTO speed or direction of rotation
other than that shown on the shredder. Serious damage can occur to the machine
and/or the operator.
Before starting to mow, never forget that the operator is responsible for the following:
1. Safe and correct driving of the tractor and shredder.
2. To learn precise safe operating procedures for both the tractor and the shredder.
3. To ensure all maintenance and lubrication has been performed on the shredder.
4. To have read and understood all safety aspects for the shredder in the operator’s
manual.
5. To have read and understood all safety decals on the shredder.
6. Checking the condition of the blades. Worn or damaged blades should be changed
before starting
7
.
7. Checking to ensure that the cutting edge is the leading edge of the blade
8
.
8. Checking that there is no wire, weed, grass or other material wrapped around
blades.
9. Checking to see if front weights need to be added to the tractor in order to maintain
balance.
10. Checking the tractor tires for the proper pressure in accordance with the tractor’s
operator’s manual.
11. Checking that the PTO shield, belt shield, front deflector shields and all other
shielding are on the machine and securely in place .
12. Making sure the proper attire is worn. Avoiding loose fitting clothing which can
become entangled. Wearing sturdy, tough-soled work shoes and protective
equipment for eyes, hands, ears and head. Never operate tractor or implements in
bare feet, sandals or sneakers.
13. Checking area for stones, branches and other debris that might be thrown.
14. Ensuring proper lighting is available, sunlight or good artificial lighting.
3.07 - Working Speed
The shredding speed depends on ground conditions, tractor HP, shredding height, and
material thickness. Under most conditions a 1 to 4 mph ground speed is best. When
mowing in areas with thick prunings of up to 2” in diameter, it is advisable to operate the
O
PERATION
16
BEFCO
D
ESTROYER
D90 O
PERATOR
’
S
M
ANUAL
8
See Section 4.03 - Blade Maintenance.
7
See Section 4.03 - Blade Maintenance.