speed is obtained. Do not mow in reverse unless absolutely necessary and only after
careful observation of the area behind the mower.
CAUTION: Do not operate this mower at a PTO speed or direction of rotation
other than that shown on the mower. Serious damage can occur to the machine
and/or the operator.
CAUTION: Before mowing check area for stones, branches and other debris that
might be thrown.
Before starting to mow, never forget that the
operator is responsible
for the following:
1. Safe and correct driving of the tractor and mower.
2. To learn precise, safe operating procedures for both the tractor and the mower.
3. To ensure all maintenance and lubrication has been performed on the mower.
4. To have read and understood all safety aspects for the mower in the operator’s
manual.
5. To have read and understood all safety decals on the mower.
6. Checking the condition of the blades. Worn or damaged blades should be changed
before starting
14
.
7. Checking to ensure that the cutting edge is the leading edge of the blade.
8. Checking that there is no wire, weed, grass or other material wrapped around
blades.
9. Checking to see if front weights to be added to the tractor in order to maintain
balance.
10. Checking the tractor tires for the proper pressure in accordance with the tractor
operator’s manual.
11.
Checking that the
PTO
shield, belt shields and all other shielding are on the
machine and securely in place.
12. Making sure the proper attire is worn. Avoiding loose fitting clothing which can
become entangled. Wearing sturdy, tough-soled work shoes and protective
equipment for eyes, hands, ears and head. Never operate tractor or implements in
bare feet, sandals or sneakers.
13. Checking area for stones, branches and other debris that might be thrown.
14. Ensuring proper lighting is available, sunlight or good artificial lighting.
15. Checking to ensure the safety chain is properly installed.
16. Safety lighting is visible and is working properly.
O
PERATION
27
BEFCO
C
YCLONE
S
UPER
-F
LEX
O
PERATOR
’
S
M
ANUAL
14
See Section 4.03 - Blade Maintenance, for details.
