2. Insert the attaching pin
(see #7, fig. 3)
into the tube welded to the hitch
(see #9, fig.
3)
. Place the shim washers
(see #5, fig. 3)
on either end of the attaching pin.
3. Place the two formed plates
(see #3, fig. 3)
on either end of the attaching pin
(see
#7, fig. 3)
with the bend facing outward.
4. With the wing arms down level with the mower decks, position the telescopic wing
arms
(see #1, fig. 3)
between the two formed plates
(see #3, fig. 3)
. Attach them to
the bolts
(see #10, fig. 3)
provided.
5. Tighten the nuts
(see #4, fig. 3)
and bolts
(see #10, fig. 3)
. Ensure after tightening
that the formed plates
(see #3, fig. 3)
move freely up and down over the attaching
pin
(see #7, fig. 3)
.
6. Using the grease fitting on the hitch
(see #6, fig. 3)
, grease the attaching pin and
formed plate.
O
PERATION
14
BEFCO
C
YCLONE
S
UPER
-F
LEX
O
PERATOR
’
S
M
ANUAL
Fig. 3 - Mowing unit assembly.
