Beetronics User Manual | Bedienungsanleitung | Manuel d’utilisation
7 EN
Safety precautions
Operation
Risk of fire or electric shock. Dangerously high voltages are present inside the unit.
- Do not expose the monitor and its components to rain, water, or excessively humid environments.
- Do not disassemble the unit.
- Refer servicing to qualified personnel only.
- Connect the AC power properly and verify if all wiring is properly connected.
This equipment is not intended for use in critical applications where its failure to operate would create immediate life
threatening circumstances. Applications including, but not limited to, nuclear reactor control, aerospace navigation
systems and life support systems are not appropriate for this product.
CAUTION!
CAUTION!
CAUTION!
CAUTION!
CAUTION!
CAUTION!
WARNING!
WARNING!
This product has been adjusted specifically for use in the region to which it was originally shipped. If operated outside
this region, the product may not perform as stated in the specifications.
Please keep the monitor out of direct sunlight, very bright lights and away from any heat source. Lengthy exposure to
this type of environment may result in discoloration and damage to the monitor.
Obstruction of the ventilation holes prevents proper cooling of the monitor’s electronics and may result in overheat-
ing. Remove any object that could fall into the ventilation holes.
Using an unapproved power cord may lead to overheating. Please use the approved cord provided by Beetronics at all
times. If your power cord is missing, please contact your local Beetronics Office.
When the monitor is cold and brought into a room or the room temperature goes up quickly, condensation may occur
on the interior and exterior surfaces of the monitor. In that case, do not turn the monitor on. Instead wait until the
condensation disappears, otherwise it may cause short cirtuit or damage to the monitor.
Only authorized use accessories manufactured or recommended by Beetronics with this product. Using unapproved
accessories may damage the monitor and will void the warranty.
This product may not be covered by warranty for uses other than those described in this manual.
If the monitor continuously displays a static image, dark smudges or burn-in may appear. To maximize the life of the
monitor, we recommend the monitor be turned off periodically or use of a moving screen saver. Failure to activate a
screen saver, or a periodic screen refresh application may result in severe “burn-in” or “after-image” or “ghost image”
symptoms that will not disappear and cannot be repaired. The damage mentioned above is not covered by the
warranty.
The backlight of the LCD panel has a fixed lifetime. Depending on the usage pattern, such as continuous usage for
long periods, the lifespan of the backlight may run out sooner, requiring replacement.
NOTICE!
NOTICE!
NOTICE!
Safety precautions
