![Beem B7.001 Скачать руководство пользователя страница 50](http://html1.mh-extra.com/html/beem/b7-001/b7-001_instruction-manual_2720281050.webp)
50
Initial use
BEEM - Elements of Lifestyle
EN
Demands on the installation location
For safe and trouble-free operation of the appliance, the installation
location has to satisfy the following requirements:
Place the appliance on a dry, flat and heat-resistant surface.
■
Do not place the appliance in a hot, wet or very humid environ-
■
ment or in the vicinity of inflammable materials.
Select the installation location such that children cannot touch the
■
hot surfaces of the appliance.
The plug socket used must be easily accessible in order to be
■
able to disconnect the appliance from the electric circuit quickly in
the event of an emergency.
Electrical connection
For safe and trouble-free operation of the appliance, the following
instructions have to be observed for the electrical connection:
Before connecting the appliance, compare the connection data
■
(voltage and frequency) on the rating plate with those of your
mains power supply. The data must correspond in order to avoid
damage to the appliance. If in doubt, ask your electrical appliance
retailer.
Ensure that the mains lead is undamaged and is not laid over hot
■
surfaces and/or sharp edges.
The mains lead must not be strained, kinked or come into contact
■
with the hot appliance.
Lay the mains lead in such a way that it does not pose a tripping
■
hazard.
The electrical safety of the appliance is only assured when it is
■
connected to a properly installed protective earth (PE) conduc-
tor system. Connection to a plug socket without PE conductor is
forbidden. If in doubt, have the house installation checked by a
qualified electrician. The manufacturer assumes no liability for
injury or damage caused by a missing or interrupted protective
earth conductor.