manualshive.com logo in svg

Bedrock SM30, Руководство по эксплуатации

Поделиться
Скачать
Bedrock SM30 Скачать руководство пользователя страница 99

 

    98 

 

 

 

 

 

Bedrock SMxx operating manual 

      

 

     © Bedrock Audio BV,  2019 

 

 

 

    

99

B.4. Reference range and range adjustment

The reference range is the +20 dB range. Once a range is selected through the “settings” 
module, no range adjustments take place during measurements and the SMxx  acts as a sin-
gle range instrument. Adjustment of the display range within the modules themselves does 
not have an impact on the measurement range, just on which range of values are displayed 
in graphs on the display.

B.5. Reference range for linearity measurements

The linearity of the SMxx is to be evaluated in the range 30 - 120 dB.

B.6. Wind spheres

The wind spheres are not part of the standard configuration and need not be considered for 
periodic testing. Wind sphere corrections are provided in Annex A for information purposes 
only.

Содержание SM30






































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды