manualshive.com logo in svg

Bedrock SM30, Руководство по эксплуатации

Поделиться
Скачать
Bedrock SM30 Скачать руководство пользователя страница 67

 

    66 

 

 

 

 

 

Bedrock SMxx operating manual 

      

 

     © Bedrock Audio BV,  2019 

 

 

 

    

67

Always make sure that you are using high-quality USB cables, especially 
when operating with a long cable between the Bedrock SMxx and your PC. 
Most USB connection issues are traced back to poor quality cables.

The main menu from the Bedrock SM50, as accessed through the Remote Display application 

under Windows 10.

If the remote display application is not working, check the following:

•  The firmware package running on your SMxx must be present in the application data 

folder of the remote display application, e.g: 

 C:\Users\<yourusername>\Appdata\local\roaming\RemoteDisplay\

Substitute your actual username in place of <yourusername>. The precise path de-
pends on your version of Windows and your device settings. The .EAP package for 
the firmware on the connected device (the same file used to update the firmware on 
the SMxx) must be in the application data folder, or the application will not run. Note 
that RemoteDisplay will prompt you if it does not have the correct firmware available, 
and offers you the option to download it from the internet (directly from the Bed-
rock website). You will need an internet connection to use this option. Alternatively, 
download the firmware update manually and select “Browse local” to find the .EAP 
package on your local disk.

•  The correct COM-port must be selected. Press TAB to choose from the COM-ports 

detected on your device. If you only see low numbers (e.g. just COM1 and COM2), 
then Windows may not have found the USB virtual COM-port associated with your 
SMxx. Try reconnecting the SMxx.

• 

Содержание SM30






































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды