manualshive.com logo in svg

Bedrock SM30, Руководство по эксплуатации

Поделиться
Скачать
Bedrock SM30 Скачать руководство пользователя страница 75

 

    74 

 

 

 

 

 

Bedrock SMxx operating manual 

      

 

     © Bedrock Audio BV,  2019 

 

 

 

    

75

16. Firmware updates

Firmware updates are released through our website Bedrock-audio.com. Before updating 
your firmware, always check:

• 

If the update you downloaded  is intended for your device type (the SM30/
SM50/SM90)

• 

If you have sufficient battery charge to complete the update cycle without 
interruption

Interrupting the power supply during the update process may render your device unusable. 
If this happens, try to repeat the update procedure. If this does not work, or if you can no 
longer access the device through USB, please contact [email protected].

Executing a firmware update is easy:

• 

Choose and download the correct firmware update package from 

 

     

 

 

 

www.bedrock-audio.com/support

• 

Connect the device to any PC or Mac through USB

• 

When prompted on the LCD screen, choose “connect through USB”

• 

The SMxx’s internal file system can now be accessed from your computer 
in the same way as any mass storage device

• 

Copy the firmware updated package to the folder named “updates”

• 

Now restart the device using its power button

The firmware update procedure will automatically start. You will be able to see the progress 
of the update procedure on the LCD display. The update may take up to 45 minutes, de-
pending on the size of the update package.

Never interrupt the firmware update procedure. Make sure that the device 
is fully charged or connected to a stable power source before starting the 
update procedure. Please be aware that the update procedure may take a 
significant amount of time, depending on the update package that you are 
installing.

Never try to install an update package  intended for a different device model. 
The update package will most likely not install; if it does, it will render your 
device inoperable. Damage sustained through attempts to install incorrect 
firmware update packages is not covered by warranty.

Содержание SM30






































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды