manualshive.com logo in svg

Bedrock SM30, Руководство по эксплуатации

Поделиться
Скачать
Bedrock SM30 Скачать руководство пользователя страница 64

 

    64 

 

 

 

 

 

Bedrock SMxx operating manual 

      

 

     © Bedrock Audio BV,  2019 

 

 

 

    

11. Accessing saved measurements from a PC

11.1. Connect USB cable

When you connect the Bedrock SMxx to the USB port of a PC or Mac, a dialog window 
will appear on the device, asking if you wish to start data transfer. If the SMxx is powered 
off when you connect it through USB, it will power on automatically.

The Bedrock SMxx will present itself to the USB host as a mass storage device. This allows 
you to access the internal file system of the SMxx. You will see these directories/folders:

• 

UPDATES: place update packages here to update the firmware upon re-
boot

• 

CALIBR: Calibration data is saved here

• 

LOG: System logs are stored here (e.g. battery life cycle management)

• 

SPL, STIPA, RTA, FFT, RT60, LAEQ, SCOPE, USBAUDIO, NOISE-
CUR, ACV, SPEECHLM: folders where measurement data and recorded 
audio from each of the measurement modules is stored.

• 

SYSTEM:  system files (NOTE: this directory is hidden)

IMPORTANT: access to the SMxx system files is made possible so that you 
can easily backup and restore the device. However, keep in mind that some 
of the internal software of the SMxx is run directly from the files displayed 
here. If you remove or change any of these files, your device will not work 
properly anymore. 

Changes to files in the hidden system folder may render the device inac-
cessible through USB, making it impossible to repair or update the system 
firmware through the normal procedure. The instrument may have to be 
returned to the factory to reinstall the firmware. 

Please note that service nec-

essary due to changes applied to files in the “system” folder is not covered by 
warranty.

11.2. Copy your measurement data

In order to process and analyze your measurement data further, copy all results files from 
the Bedrock SMxx to a local folder on your PC.  The measurement files are saved in .csv 
format. These files can be imported in almost all worksheet applications, such as Microsoft 
Excel. MS Excel templates for downloading and processing your measurement data are 
provided on the flashdrive included with your device. These will allow you to analyze the 
data further, and pre-process the data for the purpose of reporting. User manuals for these 
templates are embedded in the MS Excel files themselves.

Содержание SM30






































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды