Becx Machines HS130HR, Руководство пользователя

Страница: 9 / 34

Hedge trimmer
Type: HS130HR
Version: 05
December. 2019
Page 9 of 34
includes when you are driving to the work site. The risk of coming into contact
with passers-by is greater at these times than during trimming. There is no
hedge present to act as a protective shield in these situations and it is more
difficult for bystanders and passers-by to judge the route you are taking.
Objects that are flung out can travel a greater distance when there is no
hedge to stop them.
•
Always complete inspection and maintenance jobs.
•
The machinery must not be used for any other purposes during inspection and
maintenance.
•
The hydraulic feed to the hedge trimmer must be disconnected during
inspection, maintenance or cleaning to prevent accidental operation.
•
Always comply with local work regulations and safety rules.
•
If the machinery is used in the dark, use sufficient lighting (approx. 50 lux at
the work site).
•
Trimming operations must stop immediately if there is any possibility that
people and animals could enter the danger zone. (see 4.2)
•
Switch machinery on and off at a low revolution speed to prevent damage.
Depending on the tool carrier used, this means that the machine is running
stationary or at minimum flow.
•
• If your machine is equipped with a Flow controller. May this only be set,
without exceeding the maximum speed (RPM) as indicated on your machine.
2.3 Operating personnel
•
Operating personnel must be over 18.
•
Only persons who have received permission from the owner are allowed to
operate the system.
•
Persons must only carry out jobs for which they are trained. This applies to
both maintenance work and normal operations.
•
Personnel who operate equipment must be familiar with all possible
situations that could arise.
•
The owner or person in charge must be told if personnel operating machinery
identify faults or hazards or do not agree with safety measures.