Becx Machines HS130HR, Руководство пользователя

Страница: 21 / 34

Hedge trimmer
Type: HS130HR
Version: 05
December. 2019
Page 21 of 34
No. What to do Action Result
3 Drive to the site
where the work will
take place.
•
Always switch off the hedge trimmer if you
are not doing any trimming.
•
There is a greater risk of a bystander
entering the danger zone without being
noticed when a hedge is not being
trimmed.
•
When there is no hedge, unobstructed
objects that are flung about can travel a
greater distance.
4 Put the hedge
trimmer deck in the
desired position.
•
The hedge trimmer can be adjusted to the
correct position with the lifting arm. Please
refer to the detailed instructions in the
manual for the tool carrier and the lifting
arm.
•
The trimmer is not suitable for trimming at
ground level. The risk that the cutter
blades will touch the ground and/or any
obstacles is too great for this hedge
trimmer design.
5 Switch on the hedge
trimmer.
•
Please refer to the detailed instructions in
the manual for the tool carrier and lifting
arm.
•
It is important always to switch on and off
at a low revolution speed to prevent
damage to the machinery. The revolution
speed can be increased after engaging the
lifting arm.
Switching on and off
at a high speed of
revolutions will result
in system overload.
6 Trimming the hedge.
•
Adjust your driving speed to the quality of
trimming you want.
If you drive too
quickly the trimmed
hedge will look untidy