Beckman Instruments Biomek 2000 Скачать руководство пользователя страница 19 | Manualshive

Страница: 19 / 80

background image

Chapter 1

User’s Guide

Document 609909-AA

Biomek 2000

1-5

Accessories

A variety of options are available to customize the operation of the Biomek to suit
your laboratory's specific requirements. You can select options for handling of large
volumes of samples, high-density replication transfers, collection of optical density
data, incubation of samples, filtration applications, or any combination of the above.

Optional side modules can be added to expand the worksurface capacity by up to 50%.
The Side Loader System automates high volume sample handling, and when used with
the optional incubator, provides temperature control for unattended operation.

A Plate Reader may be mounted on the Side Loader or workstation for reading
microplates. Filter plates may be processed with the Vacuum Valve Unit and the
96-Filtration System.

Options provided by Beckman are directly controlled by the Biomek workstation.
Communication ports and software communication links are provided for attachment
and automated control of additional third-party devices.

The functionality of the Biomek can be further customized for specific applications
through the BioScript Pro scripting language.

BioWorks

The Biomek Workstation is controlled through BioWorks software which runs on the
PC controller. BioWorks provides a graphical user interface which is used to design,
run, and monitor methods. Other integrated modules provide alignment, diagnostic,
and troubleshooting functions. Context-sensitive help screens are available for most
functions and general help is provided for all modules.

All methods are validated for consistency, system configurations are automatically
verified, and potential conflicts are detected by the software.

Interconnect Diagrams

The following diagrams show the interconnection of the Biomek Workstation with the
PC controller, and other additional options. Refer to the Biomek 2000 Hardware and
Software Installation Manual for complete installation instructions, or contact your
local Beckman Field Service Engineer.

«
...
17
18
19
20
21
...
»

Содержание Biomek 2000

















































































Отзывы:

Нет отзывов

Похожие инструкции для Biomek 2000

Бренд: National Instruments Страницы: 93

Бренд: IBM Страницы: 78

Бренд: IBM Страницы: 90

CRM Point CRM-P

Бренд: Ubiquiti Страницы: 24

Бренд: AOpen Страницы: 20

Бренд: S&T embedded Страницы: 23

Бренд: Lenze Страницы: 68

Бренд: Acer Страницы: 88

Бренд: Acer Страницы: 90

Бренд: Asus Страницы: 2

Бренд: Omnitronic Страницы: 56

Бренд: Winmate Страницы: 60

Бренд: Winmate Страницы: 92

OptiPlex 7440 All-In-One W11C

Бренд: Dell Страницы: 80

Бренд: Dell Страницы: 41

Бренд: Vivo Страницы: 3

Бренд: Sonnet Страницы: 12

Бренд: Lenovo Страницы: 9

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды