manualshive.com logo in svg

Beckman Coulter UniCel DxH, Руководство пользователя

Поделиться
Скачать
Beckman Coulter UniCel DxH Скачать руководство пользователя страница 2

PN: B11956AA (March 2012)                

Page 2 of 46 

Professional Development 

WARNINGS AND PRECAUTIONS 

 

READ ALL PRODUCT MANUALS AND CONSULT WITH BECKMAN COULTER-TRAINED PERSONNEL 
BEFORE ATTEMPTING TO OPERATE INSTRUMENT. DO NOT ATTEMPT TO PERFORM ANY 
PROCEDURE BEFORE CAREFULLY READING ALL INSTRUCTIONS. ALWAYS FOLLOW PRODUCT 
LABELING AND MANUFACTURER’S RECOMMENDATIONS. IF IN DOUBT AS TO HOW TO PROCEED 
IN ANY SITUATION, CONTACT YOUR BECKMAN COULTER REPRESENTATIVE. 

 

HAZARDS AND OPERATIONAL PRECAUTIONS AND LIMITATIONS 
 

WARNINGS, CAUTIONS and IMPORTANTS alert you as follows: 

WARNING 

 –  

Can cause injury. 

CAUTION  

–  

Can cause damage to the instrument. 

IMPORTANT  

Can cause misleading results. 

 

BECKMAN COULTER, INC. URGES ITS CUSTOMERS TO COMPLY WITH ALL NATIONAL HEALTH AND 
SAFETY STANDARDS SUCH AS THE USE OF BARRIER PROTECTION. THIS MAY INCLUDE, BUT IT IS 
NOT LIMITED TO, PROTECTIVE EYEWEAR, GLOVES AND SUITABLE LABORATORY ATTIRE WHEN 
OPERATING OR MAINTAINING THIS OR ANY OTHER AUTOMATED LABORATORY ANALYZER. 

WARNING

 

Risk of operator injury if: 

•

 

All doors, covers and panels are not closed and secured in place prior to and during instrument 
operation. 

•

 

The integrity of safety interlocks and sensors is compromised. 

•

 

Instrument alarms and error messages are not acknowledged and acted upon. 

•

 

You contact moving parts. 

•

 

You mishandle broken parts. 

•

 

Doors, covers and panels are not opened, closed, removed and/or replaced with care. 

•

 

Improper tools are used for troubleshooting. 

To avoid injury: 

•

 

Keep doors, covers and panels closed and secured in place while the instrument is in use. 

•

 

Take full advantage of the safety features of the instrument. Do not defeat safety interlocks 
and sensors. 

•

 

Acknowledge and act upon instrument alarms and error messages. 

•

 

Keep away from moving parts. 

•

 

Report any broken parts to your Beckman Coulter Representative. 

•

 

Open/remove and close/replace doors, covers and panels with care. 

•

 

Use the proper tools for troubleshooting. 

 

CAUTION

 

System integrity might be compromised and operational failures might occur if: 

•

 

This equipment is used in a manner other than specified. Operate the instrument as instructed 
in the Product Manuals. 

•

 

You introduce software that is not authorized by Beckman Coulter into your computer. Only 
operate your system’s computer with software authorized by Beckman Coulter. 

•

 

You install software that is not an original copyrighted version. Only use software that is an 

original copyrighted version to prevent virus contamination. 

 

IMPORTANT 

If you purchased this product from anyone other than Beckman Coulter or an authorized Beckman 
Coulter distributor, and, if it is not presently under a Beckman Coulter service maintenance agreement, 
Beckman Coulter cannot guarantee that the product is fitted with the most current mandatory 
engineering revisions or that you will receive the most current information bulletins concerning the 
product. If you purchased this product from a third party and would like further information concerning 
this topic, call your Beckman Coulter Representative. 

 

Содержание UniCel DxH















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды