Beckman Coulter UniCel DxC 600, Инструкция по эксплуатации

Страница: 284 / 498

A13914AF
9-48
Maintenance
Four-Month Maintenance
Four-Month Maintenance
Clean the MC Reagent Lines
Clean the MC Reagent Lines
The MC Reagent Lines, Cups, and Stir Bars Cleaning procedure should be performed every four
months for ALBm, BUNm/UREAm, CREm, GLUCm
*
, PHOSm, and TPm. More frequent cleaning may
be required if erratic results, low results, or reagent cups not filling are experienced.
IMPORTANT
The system must be in Standby in order to access Maintenance mode.
Use the MC Maintenance Kit (PN 474198) (includes 3 maintenance bottles with caps and labels, and
a bottle holder) to perform the cleaning.
Prepare the following before beginning this procedure:
•
Two of the three maintenance bottles contained in the MC Line Maintenance kit are to be filled
with one of the prepared cleaning solutions. The third maintenance bottle is filled with
deionized water. Self-applied labels are included in the kit to label the contents of each bottle.
•
The maintenance bottle caps contain holes or openings into which the reagent straws from the
removed reagent bottles are inserted.
•
The maintenance bottles are placed into a bottle holder and the holder is then positioned onto
the bottom frame of the MC reagent compartment. The back of the holder hooks onto the
bottom metal frame of the MC reagent compartment, so that the holder sits upright on or near
the floor.
Cleaning the MC Lines, Cups, and Stir Bars
1
Select:
•
Utils
from the menu bar,
•
2 Maintenance
,
•
4 Cup Maintenance
.
* Only the GLUCm cup module is on DxC 600 Systems.
Table 9.2 MC Line Cleaning Preparation
MC Module Prepare By Diluting
ALBm, BUNm/UREAm, GLUCm
a
,
PHOSm
a. Only the GLUCm cup module is on DxC 600 Systems.
10% cleaning solution One part Wash Concentrate II with
nine parts deionized water.
CREm, TPm 1N HCL One part 6N HCL with five parts
deionized water.