Beckman Coulter CESI 8000, Руководство по предварительной установке

Страница: 28 / 46

B11953AC 2-2
Site Requirements and Specifications
CESI 8000 System Specifications
CESI 8000 System Specifications
Use the following specifications to prepare the environment where the system is to be located.
CESI 8000 Instrument
Table 2.2 presents system specifications and requirements for the CESI 8000 High Performance
Separation System. The CESI 8000 instrument should be placed on top of the CESI 8000 Mobile Cart.
The dimensions for the CESI 8000 instrument are also shown in
Figure 2.1 .
Table 2.2
CESI 8000 Instrument Specifications
Specification Description
Dimensions
•
Width:
— 63.5 cm (25 in.)
•
Depth:
— 72.4 cm (28.5 in.)
•
Height:
— 99.1 cm (39 in.) maximum, cover open
—
73.7 cm (29 in.) cover closed
• Weight / Mass
—
85.3 kg (188 lb)
Ventilation Clearances • Front, Rear, Left, and Right Side (facing instrument)
— 10.16 cm (4.0 in.)
Electrical
•
Power requirement:
—
100–240 VAC, 5.0A, 50/60 Hz, auto-sensing power supply
•
Fuse Rating:
— 8.0 A Slow Blow; 1/4 inch (2 ea.); 100-120 VAC
— 6.3 A Time Delay; 20mm (2 ea.); 200-240 VAC
• Power Consumption:
— Supply voltage must not exceed 10% of nominal
• Installation (Overvoltage) Category:
— Category II
External Outputs • TTL (Transistor–transistor logic):
— 2
• Contact Closures:
— 2
Mass Spectrometer
Compatibility • Nanosources:
— AB SCIEX NanoSpray III
a
— Thermo Scientific NanoSpray II
• Thermo Source Adapter Kit (BEC PN B07366) includes 2 relay cables:
— B13901 -- for MS models LTQ, LXQ, and LCQ
— B13902 -- for MS models TQS and Q Exactive