Beckman Coulter Allegra 21 Series, Инструкция по эксплуатации

Страница: 26 / 68

Description
1-8
Program Keys
The program keys are used to set run parameters (a program consists of all
of the parameters for a run). Except for the cursor and [
ENTER
] keys,
program keys are located beneath the applicable digital displays, which
show the parameters as they are input. Each key (except for the cursor
keys) has an LED in the upper left corner that lights to indicate operational
readiness. The LEDs also blink if an incorrect parameter is entered.
(Cursor Keys)
The cursor keys are up and down arrow keys (
▲
and
▼
), which can be
pressed to increment values up or down when setting parameters.
[
ENTER
]
Parameter (speed, time, temperature, and acceleration or deceleration
curve) changes made while a run is in progress must be verified by
pressing the [
ENTER
] key.
[
RPM
]
When the [
RPM
] key is pressed the last digit in the SPEED display
(0) flashes, indicating that the speed can be entered in increments of
100 revolutions per minute (rpm). After the run starts, the actual rpm
of the rotor is displayed.
[
RCF
]
The [
RCF
] key can be used to select the speed setting by desired relative
centrifugal field (RCF). The corresponding rpm is automatically calcu-
lated and displayed during the run. If the [
RCF
] key is pressed during the
run, the RCF value is shown in the SPEED display.
SPEED TIME TEMP °C ACC/DEC
IMBALANCE
ENTER
PULSE
ACCEL
DECEL
TEMP RPM RCF ROTOR TIME
STOP START
FAST
STOP OPEN
DOOR
▲ ▼