Beckhoff KL2692, Документация

Страница: 24 / 34

KS2000 Configuration Software
KL2692 24 Version: 2.0.0
4.4 Settings
The dialog mask for the parameterization of the KL2692 can be found under Settings .
Fig. 17: Settings via KS2000
Watchdog time (R 35 [
}
29] )
This can be used for setting the watchdog time (default: 4 ms). Within the watchdog time, an edge change
must occur on the toggle bit of the control bytes (
CB.0 [
}
26] ), in order to prevent the drop-out of the output
relays.
Minimum switch-off time ( R36 [ } 29] )
This can be used for setting the minimum time (default: 50 ms) for which the relays remain switched off after
the watchdog has been triggered, even if, after a subsequent monitoring activation, the following pulse
sequence is recognized as correct.
4.5 Process data
The Status byte (Status), the Control byte (Ctrl) and the process data (Data) are displayed in a tree structure
under
ProcData .
Fig. 18: ProcData
The reading glasses mark the data that are currently graphically displayed in the History field.