Beckhoff KL2532 Скачать руководство пользователя страница 39

Страница: 39 / 65

Configuration software KS2000

KL2532/KS2532, KL2552/KS2552

Version: 3.2.0

Commissioning

The KS2000 software facilitates commissioning of machine components or their fieldbus stations: Configured
settings can be transferred to the fieldbus modules by means of a download. After a

login

to the terminal

station, it is possible to define settings in couplers, terminals and Fieldbus Box modules directly

online

. The

same high-level dialogs and register access are available for this purpose as in the configuration phase.

The KS2000 offers access to the process images of the bus couplers and Fieldbus Box modules.

• Thus, the coupler's input and output images can be observed by monitoring.

• Process values can be specified in the output image for commissioning of the output modules.

All possibilities in the

online mode

can be used in parallel with the actual fieldbus mode of the terminal

station. The fieldbus protocol always has the higher priority in this case.

5.2

Parameterization with KS2000

Connect the configuration interface of your fieldbus coupler with the serial interface of your PC via the
configuration cable and start the

KS2000

configuration software.

Click on the

Login

button. The configuration software will now load the information for the

connected fieldbus station.
In the example shown, this is

• A Bus Coupler for Ethernet BK9000

• a KL1xx2 digital input terminal

• a two-channel KL2552 DC motor output stage

• a KL9010 bus end terminal

Содержание KL2532


































































Результаты поиска

Содержание KL2532

Отзывы:

Похожие инструкции для KL2532

Бренды по названию

Популярные бренды

Beckhoff KL2532, Документация

Результаты поиска

Содержание KL2532

Отзывы:

Похожие инструкции для KL2532

Бренды по названию

Популярные бренды