Beckhoff EK1110, Документация

Страница: 13 / 51

Product overview
EK1110, EK1110-0008 13 Version: 2.
2.2 Technical data
Technical data EK1110 EK1110-0008
Task in the EtherCAT system Conversion of the E-bus signals to 100BASE-TX Ethernet for extension
of the EtherCAT network
Transmission medium Ethernet CAT 5 cable (shielded)
Cable length between two Bus
Couplers max. 100 m (100BASE-TX)
Protocol / Baud rate any EtherCAT protocol / 100 Mbaud
Delay approx. 1 µs
Configuration no address and configuration settings required
Bus connection 1 x RJ45 1 x M8, shielded, screw type
Power supply from E-bus
Current consumption typ. 130 mA
Dielectric strength 500 V (supply voltage/EtherCAT)
Dimensions (W x H x D) approx. 44 mm x 100 mm x 68 mm
Weight approx. 50 g
Permissible ambient temperature
range during operation -25°C ... +60°C
(extended temperature range) 0°C ... +55°C
Permissible ambient temperature
range during storage -40°C ... + 85°C -25°C ... + 85°C
Permissible relative humidity 95%, no condensation
Mounting [ } 22]
on 35 mm mounting rail conforms to EN 60715
Vibration/shock resistance conforms to EN 60068-2-6 / EN
60068-2-27,
see also
installation instructions
[
}
25] for enhanced mechanical
load capacity
conforms to EN 60068-2-6 / EN
60068-2-27
EMC immunity/emission conforms to EN 61000-6-2 / EN 61000-6-4
Protection class IP20
Installation position variable
Approval CE
ATEX [
}
33]
cULus [
}
34]
CE
ATEX [
}
32]
cULus [
}
34]
2.3 Start
For commissioning:
• mount the EK1110 as described in the chapter Mounting and wiring [
}
20]
• configure the EK1110 in TwinCAT as described in chapter Parameterization and commissioning
[ } 36] .