Beckhoff EK1110, Документация

Страница: 12 / 51

Product overview
EK1110, EK1110-0008 12 Version: 2.
2 Product overview
2.1 Introduction
EK1110/ EK1110-0008 EtherCAT extension
Fig. 9: EK1110/ EK1110-0008
Like the E-bus end terminal, the EK1110 and accordingly the EK1110-0008 EtherCAT extension is
connected to the end of the EtherCAT Terminal Block. The terminal offers the option of connecting an
Ethernet cable with RJ 45 or rather M8 connector, thereby extending the EtherCAT strand electrically
isolated by up to 100 m. In the EK1110 (EK1110-0008) terminal, the E-bus signals are converted on the fly
to 100BASE-TX Ethernet signal representation. Power supply of both terminals to the electronics is via the
E-bus. No parameterization or configuration tasks are required.
The M8 socket of the type EK1110-0008 is compatible with the EtherCAT Box modules. If Ethernet cables
with adequate performance are used, e.g. ZK1090-3131-1xxx, line lengths of 100 m are possible via M8.
Connection
Terminal point Description Type
Designation EK1110 EK1110-0008
X1 Connection for EtherCAT networks (100BASE-
TX Ethernet signal representation) RJ45 M8