Beckhoff CPX29 0000 Series, Инструкция по установке и эксплуатации

Страница: 12 / 39

For your safety
CPX29xx-0000 12 Version: 0.2
2.4 Staff qualification
All operations involving Beckhoff software and hardware may only be carried out by qualified personnel with
knowledge of control and automation engineering. The qualified personnel must have knowledge of the
administration of the Control Panel and the associated network.
All interventions must be carried out with knowledge of control programming, and the qualified personnel
must be familiar with the current standards and guidelines for the automation environment.
2.5 Operator's responsibility
The operator must ensure that:
• the product is only used as intended (see chapter: --- FEHLENDER LINK ---).
• the product is in a sound condition and in working order during operation.
• the product is operated, maintained and repaired only by qualified and authorized personnel.
• the personnel is instructed regularly about relevant safety aspects, and is familiar with the operating
manual and in particular the safety instructions contained herein.
• the operation manual is in good condition and complete, and always available for reference at the
location of the product.
National regulations
Depending on the type of machine and plant in which the Control Panel is used, national regulations
governing the controllers of such machines will apply, and must be observed by the operator. These
regulations cover, amongst other things, the intervals between inspections of the controller. The operator
must initiate such inspections in good time.
Procedure in the event of a fault
In the event of faults at the Control Panel, the list in the section Troubleshooting [ } 28] can be used to
determine the measures to be taken.
Operator requirements
Anyone who uses the Control Panel must have read these operating instructions and must be familiar with
all the functions of the software installed on the Industrial PC to which he has access.