Beckhoff CPX29 0000 Series, Инструкция по установке и эксплуатации

Страница: 13 / 39

Transport and storage
CPX29xx-0000 13 Version: 0.2
3 Transport and storage
Transport
NOTE
Short circuit due to moisture
Moisture can form during transport in cold weather or in the event of large temperature fluctuations.
Avoid moisture formation (condensation) in the Control Panel, and leave it to adjust to room temperature
slowly. If condensation has occurred, wait at least 12 hours before switching on the Control Panel.
Despite the robust design of the unit, the components are sensitive to strong vibrations and impacts. During
transport the Control Panel must be protected from:
• excessive mechanical stress
• and the original packaging should be used.
Table 1: Dimensions and weight of the individual Panels.
CPX2915 CPX2919 CPX2921
Dimensions (W x H x D) 368.2 x 295.3 x 58 mm 438,3 x 369 x 58 mm 543 x 334.7 x 58 mm
Weight approx. 3.7 kg approx. 5.4 kg approx. 5.9 kg
Storage
Store the Control Panel in the original packaging in a dry environment at a temperature between -20°C and
70°C.
Unpacking
Proceed as follows to unpack the unit:
1. Remove packaging.
2. Do not discard the original packaging. Keep it for future relocation.
3. Check the delivery for completeness by comparing it with your order.
4. Please keep the associated paperwork. It contains important information for handling the unit.
5. Check the contents for visible shipping damage.
If you notice any shipping damage or inconsistencies between the contents and your order, you should notify
Beckhoff Service.