Beckhoff CP6606, Руководство пользователя

Страница: 17 / 40

Commissioning
CP6606 17 Version: 2.0
4 Commissioning
Operation of the Panel PC
The Panel PC is operated via the touch screen.
NOTE
Damage to the touch screen
Operating the touch screen with unsuitable objects may damage the touch screen.
• Only operate the touch screen with your bare finger or with your finger using a suitable glove.
• If you use gloves, make sure that no hard particles such as metal shavings, glass splinters or similar ad-
here to the glove.
Commissioning
In order to use the Panel PC, you must first commission it. The first step is to transport the device to is
operating location and unpack it. This is followed by installing the device in the panel of the control cabinet,
connecting the cables and the power supply and finally switching on the Panel PC.
4.1 Transport and storage
The specified storage conditions must be adhered to (see chapter 8 Technical data [ } 34] ).
Despite the robust design of the unit, the components are sensitive to strong vibrations and impacts. During
transport the device must therefore be protected from mechanical stress. Appropriate packaging of the Panel
PC, in particular the original packaging, can improve the vibration resistance during transport.
NOTE
Hardware damage due to condensation
Unfavorable weather conditions during transport can cause damage to the device.
• Protect the device against moisture (condensation) during transport in cold weather or in case of ex-
treme temperature fluctuations.
• Do not put the device into operation until it has slowly adjusted to the room temperature.
• Should condensation occur, wait for about 12 hours before switching the device on.
Unpacking
Proceed as follows to unpack the device:
1. Check the packaging for transport damage.
2. Remove packaging.
3. Keep the packaging for possible future transport.
4. Check your delivery for completeness by comparing it with your order.
5. Check the contents for visible shipping damage.
6. In case of discrepancies between the package contents and the order, or in case of transport damage,
please inform Beckhoff Service (see Chapter 9.1 Service and Support [ } 35] ).
4.2 Control cabinet installation
The Panel PC CP6606 is designed for installation in the front of a control cabinet in machine and system
engineering. The environmental conditions specified for operation must be observed (see chapter 8
Technical data [ } 34] ).