Beckhoff C6015-0010, Руководство пользователя

Страница: 35 / 49

Decommissioning
C6017 35 Version: 2.1
6.2 Disassembly and disposal
Before you can remove the Industrial PC from the control cabinet, you must first disconnect the power supply
and the cables (see Chapter 6.1
Disconnecting the power supply and cables [ } 34] ).
Disassembly via mounting plates
To remove the Industrial PC with the corresponding mounting plate 1 or 2 from the control cabinet, proceed
as follows:
1. Loosen the fastening screws just enough so that they remain attached to the control cabinet.
2. Lift the PC until the fastening screws slide into the keyholes (see Fig. 25).
3. Remove the PC from the control cabinet.
ð You have successfully disassembled the PC.
Fig. 25: C6017 _Position of the fastening screws
Disassembly via DIN rail adapter
To remove the Industrial PC from the control cabinet via mounting plate 3 with the DIN rail adapter, follow
the steps below, which are shown in Fig. 26:
1. Push the PC upwards to press in the spring contacts on the DIN rail adapter (A).
2. Unhook the upper side of the adapter from the DIN rail (B).
3. Also unhook the lower side of the adapter from the DIN rail.
ð You have successfully removed the Industrial PC from the control cabinet.
A B
Fig. 26: C6017_Dismantling the DIN rail adapter