Beckhoff AG3210, Руководство по эксплуатации

Страница: 53 / 66

Mechanical installation
Version: 2.7 ─── 53 AG3210
Do not exceed the permissible axial forces
If the motor shaft cannot be inserted easily, the screw on the
clamping hub must be loosened a little more.
With certain motor shaft diameters, a slotted spacer sleeve must
be installed in addition. If there is a groove on the motor shaft, it
must be aligned with the slot in the spacer sleeve.
1
2
► Insert the motor shaft [1] into the clamping hub [2]
► Make sure that no gap is created between the motor and the
adapter plate
1-4
1 2 3 4
5
5
This example shows a motor size with four fixing points in the
flange.
► Coat screws [1], [2], [3] and [4] with threadlocker
► Insert bolts [1], [2], [3] and [4] and tighten evenly
► Tighten bolt [5]. Refer to the chapter "Clamping hub", [ Page 50].
► Insert the plug in the adapter plate again