Becker VARIAIR DIRECT SCREW 1500, Руководство по эксплуатации

Страница: 9 / 25

28100031
100 08/2017
Page: 9
Trouble-shooting in case of malfunction
• Error diagnosis: If an error has occurred and resulted in shutdown of the unit, the cause of the error
should be investigated in accordance with the table shown in section 2.5: (Error messages and
troubleshooting) . Only after doing so the unit should be restarted in accordance with the methods stated
below.
• Motor contactor: If a malfunction has occurred due to activation of a motor contactor, an automatic
restart will not occur until the switch is back in its starting position.
• Temperature switch: After a shutdown due to overheating, the unit can only be restarted after the switch
has changed back to rest position.
• Oil pressure switch: If the switching point of the contact manometer has been activated, the
screw pump has to be restarted by pressing the [START] key independently of the mode of operation.