Becker Traffic Assist Z 107, Руководство по эксплуатации

Страница: 40 / 86

40
>>> NAVIGATION MODE
> D
> GB
> F
> I
> E
> P
> NL
> DK
> S
> N
> FIN
> TR
> GR
> PL
> CZ
> H
> SK
If the route guidance is already running
you will be asked whether the new desti-
nation should replace the old destination
or if the new destination should be regard-
ed as a waypoint.
>
Select
Add as stopover
or
Replace old
destination
.
If the route guidance is already running
and a waypoint has already been entered
you will be asked whether the new desti-
nation should replace the old destination
or the waypoint.
>
Select
Replace stopover
or
Replace
old destination
.
Points of interest
Points of interest (POI) are included in
the map and can be displayed there.
Points of interest include airports and fer-
ry ports, restaurants, hotels, petrol sta-
tions, public buildings. You can use points
of interests as navigation destinations.
> Press
Enter destination
in the fast ac-
cess menu.
>
Press the
Select Point of Interest
but-
ton.
Note:
If there is no GPS signal when the route
is calculated, the following will be dis-
played:
When a GPS signal is available, the route
calculation will start automatically.
When the
Last position
button is
pressed, the last known position is used
and the route calculated from this posi-
tion.
Note:
You can only select points of interest in
the area in question if the GPS reception
is adequate for determining a position.
Otherwise, the last position stored will be
used.