55
Navigation mode
Dynamic route guidance
You can activate dynamic route guid-
ance by selecting
'\QDPLF URXWH
in the
route options.
If dynamic route guidance has been acti-
vated, a continuous check is made for
the presence of relevant announcements
for the selected route. The route is then
calculated using the “fast route” option,
while taking into account current traffic
announcements. If it is determined dur-
ing these continuous checks that a traffic
announcement is of relevance for the
route guidance, the unit will automati-
cally re-calculate a new route to the des-
tination.
1HZURXWH
is shown on the display. There
is also the voice announcement “
The
route is being recalculated due to cur-
rent traffic announcements
”.
Your navigation system can receive
TMC information, whether a TMC sta-
tion is selected or not. However, in order
to guarantee optimal reception of TMC
information, we recommend the selec-
tion of a TMC station.
Note:
As the traffic announcements are trans-
mitted by radio stations, we cannot
assume responsibility for the complete-
ness or accuracy of the announcements.
Austria: The location and event code
was made available by ASFINAG and
BMVIT.
Note:
If no TMC stations are received for
10 minutes,
1R 70& UHFHSWLRQ DW SUHVHQW
'\Q URXWH JXLG QRW SRVVLEOH
is displayed
and a short signal tone sounds.