20
General operation
Becker Surround
You can use this function to activate vir-
tual surround sound and select the vehi-
cle size to optimise the surround sound
function.
X
Select
%HFNHU VXUURXQG
in the sound
settings.
X
Select
%HFNHU VXUURXQG
and press the
rotary control/push button
to
switch virtual surround sound on (
)
or off (
).
X
Select
/DUJHYHKLFOH
or
0HGLXPVL]HGYHKL
FOH
(on =
).
Subwoofer
You can set the volume level of the
subwoofer output/ deactivate the
subwoofer output.
X
Select
6XEZRRIHU
in the sound settings.
X
Turn the rotary control/push button
to select the required value.
Crossover
Use this function to set the threshold
frequencies for the front loudspeakers,
the rear loudspeakers and the subwoofer.
X
Select
&URVVRYHU
in the sound settings.
X
You may now select
)URQWORXGVSHDNHUV
,
5HDUORXGVSHDNHUV
or
6XEZRRIHU
.
•
)URQWORXGVSHDNHUV
and
5HDUORXGVSHDNHUV
You can set the lower threshold
frequency of the front and rear
loudspeakers to a value of between
RII
,
20 and 150 Hz.
•
6XEZRRIHU
You can set the upper threshold
frequency of the subwoofer to a value
of between 50 and 150 Hz.
Note:
The Becker Surround function is not
available for medium wave or short
wave.
Note:
Only one of the vehicle types in the list
can be active (
).
1019
Note:
A setting of "+10" indicates an increase
in the volume of the subwoofer.
Select
RII
to deactivate the subwoofer
output.
In addition,
6XEZRRIHU
is deactivated
with the crossover setting.
1024
1025