Becker C16, Руководство по сборке и эксплуатации

Страница: 18 / 24

Programming and deleting the run times
Programming the run times
This function is only available with MemoControl transmitters from the Becker Centronic
range of control units.
This tubular drive can save one switching time for one retraction and one extension cycle.
In the “Timer” slide switch position, the retraction and extension cycles are automatically repeated every 24 hours.
It does not matter what position the manual/auto slide switch is in when programming the switching time. Previously stored switch-
ing times are overwritten.
1. The tubular drive must be in the upper limit position to program the Extend run time, and must be in the lower limit position for
the Retract run time.
2. Wait for the time you wish the automatic drive command to be executed.
3. At the desired time, press and hold the relevant direction button until the tubular drive briefly stops after approx. 6 seconds
and then continues to the limit position.
4. Release the direction button.
The tubular drive has saved the current time for this direction of travel.
Deleting the run times
When deleting, both run times are always deleted.
To delete the retract and extend run time, press the STOP button for 10 seconds. The tubular drive makes a "click click" sound to
confirm.
The run times are now deleted.
Activating/deactivating the additional fabric untensioning function with the
master transmitter
The "to retracted stop" limit position must be set for the fabric untensioning function.
This function is deactivated on delivery.
Activating/deactivating the fabric untensioning function
Open the shading solution to the Retract limit position.
3s
Then press the programming button, and also the STOP and Extend buttons for ap-
proximately 3 seconds.
►
The tubular drive confirms.
Disposal
This product is made of various materials which must be disposed of properly. Find out about the applicable regulations on recyc-
ling or disposal for this product in your country.
The packaging material must be disposed of properly.
Maintenance
These drives are maintenance-free.
18 - en