Becker C16, Руководство по сборке и эксплуатации

Страница: 13 / 24

Installation step 4:
Use the DOWN button to run the bolt in the down direction and disengage it from the
bolt mechanism, and then stop the tubular drive immediately. Now press the pro-
gramming button and also the DOWN button for about 3 seconds. The tubular drive
acknowledges and the unlocking limit position is saved.
► Limit positioning is now complete.
The blind will now lock and unlock automatically in the lower limit position when you
close and open it.
Deleting the limit positions
Attention
When the limit positions are deleted, all the other set functions (intermediate position I, in-
termediate position II) are deleted as well.
Once set, the limit positions can only be deleted with the master transmitter.
10s
Press the programming button and, within the next 3 seconds, press the STOP button
at the same time and hold the two buttons down for 10 seconds.
▻ The tubular drive acknowledges.
► The limit positions are now deleted.
Intermediate position I in the down direction
The intermediate position I is any shading solution position of your choosing. It is not pos-
sible to set an intermediate position I in the area of the limit position Both limit positions
must be set before the intermediate position I is set.
When both limit positions are deleted, this set function is deleted as well.
Setting the intermediate position I
Travel the shading solution to the desired intermediate position I.
Press the STOP button and, within 3 seconds, also press the DOWN button and hold the two but-
tons down.
▻ The tubular drive acknowledges.
► The intermediate position I is now saved.
Checking the intermediate position I
2x
Press the DOWN button twice within one second.
► The shading solution runs to the intermediate position I.
Deleting the intermediate position I
2x
Move the shading solution to the intermediate position I.
Press the STOP button and, within 3 seconds, also press the DOWN button and hold the two but-
tons down.
▻ The tubular drive acknowledges.
► The intermediate position I is now deleted.
13 - en