Becker C16, Руководство по сборке и эксплуатации

Страница: 10 / 24

Commissioning
Explanation of symbols
UP button
STOP button
DOWN button
Programming button
Receiver confirms once or multiple times by “clicking” or “shifting”
1 = direction switch
2 = radio switch
Unlocked
Locked
Locking bolt Moving part of the locking system on the front section of the sun protection
system
Bolt mechanism Fixed part of the locking system in the guide track of the sun protection sys-
tem
N
1
2
1
2
4
3
4
230V AC / 50 Hz
L1
PE
Connecting the tubular drive
Connect the tubular drive to the power supply.
1 = blue 3 = black
2 = brown 4 = green-yellow
Readying the tubular drive for programming
Readying the tubular drive for programming by switching on the power
▻
Switch on the power.
►
The tubular drive is ready to programme for 3 minutes
If several tubular drives are to be connected in parallel, you can deactivate the program-
ming mode on one tubular drive by switching the radio switch to the outside position after
turning the power on.
10 - en