BecherAir Components BECMATIC 550, Руководство пользователя

Страница: 15 / 17

15
ESCAPEMENT MAINTENANCE:
* Every 3 months. Check all air fittings and tighten if necessary.
* Every 3 months. Check all hardware and tighten if necessary. (If hardware is tightened
on slide rods be careful not to over torque as this could induce twist into assembly causing it to
bind when actuated. Tighten screws on each end of the slide rods to a snug condition then
actuate the escapement by hand to verify freedom of movement throughout the actuation range.
Complete the tightening in a rotational fashion until all screws are tight. After all hardware is
tight verify freedom of movement throughout actuation range.)