10
OPERATION
The Becmatic Spring Feeder/ Detangler
takes a quantity of springs from the rear
chamber and feeds them forward to the
spinning chamber where they are
separated, (See Fig.1.) and fed to the
Figure 1
outlet nozzle, (Fig. 2). A cycle timer
provides an air jet to clear the nozzle of
tangled springs (Fig.3). The springs are
then fed down the feed tube to the spring
escapement.
Figure 2
Load springs
into the rear chamber of the
spring feeder/detangler. It is
recommended that the quantity be kept to
no more than is necessary to prevent
excessive spinning of springs, which may
result in hooked or damaged parts.
Figure 3
*
Severely tangled or hooked springs should be removed from the reservoir prior to adding
new parts.
*
Springs should be stored in closed containers to avoid contamination and damage.
*
Springs should be clean, dry and free of lubricants or any foreign contamination.
*
Foreign debris and damaged parts may cause jamming or impair feed rates.
* Power to the machine should be shut off when the feeder is not in use.
Содержание BECMATIC 550
Страница 9: ...9 MOUNTING SPECIFICATIONS AUTOMATIC ESCAPEMENT ...
Страница 17: ...17 ...