Device Configuration
Advanced Setup
– Serial (RS232 Console Port)
75
BEC MX-200Ae User Manual
data will be transmitted. Time range from 1
– 30000ms.
⚫
Character Delimiter:
Default characters are 0x0d0a. Serial data will get transmitted
when seeing the specified character(s), in this case, 0x0d0a. Valid characters “0x” +
Hex code.
◼
TCP Idle Timeout (Seconds):
Default time is in 60 seconds. Specify an idle time-out in
seconds. After the timeout expires, meaning no data transmission within the defined time,
serial connection will get aborted. Time range from 10
– 180 seconds.
Telnet Server:
◼
Port:
Use 782(tcp/udp), an unassigned port. Specify a tcp/udp port other than port 782 for
the Telnet server.
Port 23 is being reserved, don’t use this port.
Note: MX-200Ae uses port 23 as default port the embedded Telnet server.
SSH Server:
◼
Port:
Use 782(tcp/udp), an unassigned port. Specify a tcp/udp port other than port 782 for
the SSH server. Port 22 is being reserved, don’t use this port.
Note: MX-200Ae uses port 22 as default port the embedded SSH server.
Click
Save
to apply settings
