Device Configuration
Dual WAN
– General Setting (Failover & Failback)
55
BEC MX-200Ae User Manual
Failover/Fallback Rule Decisions:
1.
Probe by Ping:
Enable
Ping to the gateway or an IP address
Gateway:
Internal system will wait for responses to the pings from the gateway of the WAN.
Host:
Internal system will wait for responses to the pings from a fixed IP address.
2.
Probe by Signal Strength:
Enable to measure the LTE signal strength
Minimum RSRP / RSSI:
Set a minimum requirement for RSRP and RSSI for initiating
automatic WAN failback or failover procedures.
The valid range is from -111 ~ -5. 0
means don’t care/no need to check this value.
NOTE:
Both the RSRP and RSSI cannot be 0 at the same time.
Click
Save
to apply settings.
