Device Configuration
Advanced Setup
– Static QoS
69
BEC MX-200Ae User Manual
QoS
QoS helps you control the upload traffic of each application from LAN (Ethernet and/or Wireless) to
WAN (Internet).
It facilitates you the features to control the quality of throughput for each application. This is useful
when there on certain types of data you want giver higher priority to, such as voice data packets given
higher priority than web data packets.
QoS helps you control the upload traffic of each application from LAN (Ethernet and/or Wireless) to
WAN (Internet).
It facilitates you the features to control the quality of throughput for each application. This is useful
when there on certain types of data you want giver higher priority to, such as voice data packets given
higher priority than web data packets.
SW QoS:
Select
Activate
to enable the QoS
LAN to WAN (Bandwidth):
You want to control the traffic from local network to the outside
(Upstream). You can assign the priority for the application or you can limit the rate of the application.
E.g.:
you have an FTP server inside the local network, and you want to have a limited control by the
QoS policy and so you need to add a policy with LAN to WAN direction setting.
WAN to LAN (Bandwidth):
Control traffic from WAN to LAN (Downstream).
Click
Bandwidth Save
to save settings.
Rule Index:
Index marking for each rule up to maximum of 16.
WAN Interface:
Select a WAN interface connection to allow external access to your internal
