bebeduE HAKKA, Инструкция по эксплуатации

Страница: 28 / 72

28
UK
IMPORTANT: PLEASE READ THE
INSTRUCTIONS FOR USE CAREFU-
LLY, AND KEEP THEM FOR FUTURE
REFERENCE.
HAKKA PUSHCHAIR
This vehicle is suitable for newborn babies and older, up to 15 kg.
HOW TO OPEN THE PUSHCHAIR
Release the fold hook, which keeps the pushchair closed (Fig.1). Next, lift up the handle
(Fig. 2), the pushchair will be fully open when you hear a click (Fig.3).
MOUNTING THE WHEELS
Press down the buttons on the front wheel housing and fix the housing onto both the
pushchair’s front legs (Fig.4). When you hear a click, it is fixed in place (Fig.5). Next, fix
the front wheels onto the housing (Fig.6).
As shown in the picture (Fig. 7), press down on the button at the top end of the quick-
release axle, in order to control the mobile grips at the end of the axle.
This will enable the axle to pass through the holes in the wheels.
Next, repeat the action to mount the wheel on the axle in the rear wheel housing (Fig.8).
When you release the button, the rear wheels will be held in place (Fig.9).
Check that the front and rear wheels are properly fixed before using the pushchair.
FIXING THE FOOTREST SUPPORT
Hold the footrest support with both hands and then slide it into the plastic connecting
pieces (Fig.10). When you hear a click, it is fixed in place (Fig.11).
FIXING THE FRONT BUMPER BAR
Hold the bumper bar and press down on the control buttons on both sides simulta-
neously (Fig.12). Next, fix the bumper bar to both sides of the pushchair. When you
hear a click, it is fixed in place (Fig.13).
OPENING THE CANOPY
Unfold the canopy (Fig.14). Make sure it is fully open (Fig.15).
FOLDING THE PUSHCHAIR
Lower the back support:
Lower it as far as it will go (Fig. 16) by using the lever located behind the back support.